Hello,
I am having the same issue with USB 3.0 ports and a need for firmware update 18 that is described in this post:
My issue is with DJ control RMX but the issue is the same. If anyone can get me the needed firmware file it would be much appreciated.
Hello Otomox,
Welcome to the user community
The firmware is not the same for DJ Console Rmx and for DJ 4Set even if the USB audio chipset is the same, the controller is not the same, so the firmware is entirely different, the firmware version for DJ Console Rmx to operate on today's computers with Windows 10 or 11 is release 32.
1) Have you anywhere access to a PC operating in Windows 8.0 or older?
2) If you have no PC operating in Windows 8.0 or older, you cannot upgrade the DJ Console Rmx firmware via the USB bus, you need to
- open the DJ Console Rmx casing,
- remove the printed circuit board which has the USB port,
- remove the eeprom which is on a socket,
- program the eeprom on an eeprom programmer (as https://www.amazon.com/WWZMDiB-CH341A-Programmer-Removable-Organizer/dp/B0BYSRSZPC/ )
- and re-install the eeprom in the controller.
If you are at ease with eeprom programming or if you know an electronic repair store, I can send you the firmware to burn in the eeprom, but it cannot be done without opening the casing a removing the eeprom except if you have an old PC from the time before Microsoft changed the USB layer of its operating system.
