any can help me to setup my hercules dj console rmx wtih external cdjs denom dns5000 mi sound setup is inputs : line ins
outputs : headphones soundcard : hercules dj console rmx asio but in send me error in the asio sund driver any can hepme thans
Hello Terry,
You must
1) open the control panel of your DJ Console Rmx prior to running your DJ software.
2) Set the Rmx in ASIO in the control panel.
3) And then run your DJ software.
Also precise what is your DJ software (name and version).
You are better off using the default configuration in Virtual DJ:
- Input : Line-Ins
- Output(s): Headphone
-Soundcard: DJ Console Rmx
VDJ will automatically switch to ASIO mode (because inputs have been enabled).
#codigos
#codigos
#codigos
#codigos
i got this settings but nothing seens to work ,could any one upload images or make a videotutorial for this or any link that explain how to.....thanks
Again, for the menu Soundcard, select DJ Console Rmx (with the image of the console) and NOT ASIO > DJ Console Rmx ASIO.
In theory, it should be the same thing, but often times, VDJ has issues with selecting ASIO.
Also, in the Advanced tab (Advanzo), be sure to select USB Streaming 1-2 (Defecto).
well now i put thyis setting but still send me asio error even if i select ...for soundcard : DJ Console Rmx (with the image of the console still send me error check my setting in the pics and thanks for the suport i aprecciate that...also y have selected source 1 and source 2 buttom on mi console
#codigos
#codigos
Try this:
- Close VDJ
- In the DJ Control Panel, make the audio mode is set to WDM
- Unplug and replug the console to the USB port
- Make sure the audio mode is still set to WDM, then launch VDJ
1) Normally, VDJ should automatically switch from WDM to ASIO. Does this work ?
2) If it does change to ASIO, does VDJ still give you the error ?
3) If yo click APPLY, does the message appear again ?
i did all the stuff you tellme and i dint change from WDM to asio when i luch vdj
and when i change to hercules dj console rmx asio in vdj still send me a error so the message still apears what can i do ..thanks for the reply
1) Download the following software:
http://www.tropicalcoder.com/ASIOTestSigGen.htm
2) before launching the application,be sure that:
- the DJ Console is set to ASIO in the Control panel
- VDJ or other applications susceptible of using the ASIO driver are closed.
3) Upon launching ASIOSinGen, configure as follow:
- Select ASIO driver:
Obviously choose the Console ASIO driver
- Select Device Output:
I would choose the headphone output (Output 3/4) since you can easily control the volume (be sure to to lower the volume before proceeding with the test).
Once this is done, click any of the wave or noise button which will send a short signal in the headphone. If you can hear the signal, then the ASIO driver is working correctly.
IF however you get an error message, then there may be a problem with the ASIO driver.
4) Switch to WDM in the control panel. Launch ASIOSinGen again.
You should normally get the following window message:
Can't interface with an ASIO driver - Exiting!
Change the audio mode to ASIO and launch ASIOSinGen again. If you are able to launch the applications normally, then we know the control panel and the ASIO driver are working correctly and that the problem is most probably related to the VDJ installation.
well everything works fine with the asiotestsinggen them it must be my virtual dj program im using a cracked one cause im still not having enought money to buy a original one but thanks alot for all the suport i´ll try to install another version and see if this solve the problem...
