i need help!! i have the hercules rmx and the virtual dj 5.2. i have a voice processor(dual deltafex-peavey) connect to the rmx input. my problem is when i try to use the voice processor(dual deltafex-peavey) and the two decks of the rmx,i can use the voice prossesor(dual deltafex-peavey) but it disable one of the decks. i want to be able to use both decks and the voice prossesor (dual deltafex-peavey)at the same time.
Are you using it for effects on voice or on the total output? There's no effects loop, but for total output you should be able to chain through the processor to your amp/speakers using the 1/4" outs. Of course, you're at the wet/dry/bypass mixing of your Peavey unit then since there is not a loop.
Voice only would be tough. You would need an outboard pre, with an effects loop, that can also send back through the mic pre. I've used an outboard pre with the RMX (and ART tube), but typically they are not made to plug back into a pre.
If you're using this on music, have you checked out the VDJ effects? Might want to try the Traktor trial as well. It's known for great effects and version 1.2 just expanded them.
Hello Eddy,
If you are eduardobautista, then Made In Breizh has answered to this question on VirtualDJ forum:
"As soon as you activate an audio source in VirtualDJ, it replaces the software Virtual deck, that is why you lose a deck when you activate an audio source, it would require a version of VirtualDJ DJ software with 1 additionnal software deck to keep 2 virtual decks in VirtualDJ when activating an external stereo source.
A possible solution, if you accept to mix only 1 channel of your voice processor instead of 2 channels, is to
- connect 1 output channel of your voice processor into DJ Console Rmx microphone input,
- set the microphone volume button on the Rmx very low,
- open DJ Console Rmx control pannel, and disable the talkover attenuation in the Main tab,
- and activate the Mic On/Off button on the DJ Console Rmx each time you want to mix your voice processor in the music.
I never used a voice compressor, but I have already done this mix of an output of my groove box onto DJ Console Rmx microphone input and it works well."
are you using it for effects on voice or on the total output? theres no effects loop, but for total output you should be able to chain through the processor to your amp/speakers using the 1/4" outs. of course, youre at the wet/dry/bypass mixing of your peavey unit then since there is not a loop.
voice only would be tough. you would need an outboard pre, with an effects loop, that can also send back through the mic pre. ive used an outboard pre with the rmx (and art tube), but typically they are not made to plug back into a pre.
if youre using this on music, have you checked out the vdj effects? might want to try the traktor trial as well. its known for great effects and version 1.2 just expanded them.
hello eddy,
if you are eduardobautista, then made in breizh has answered to this question on virtualdj forum:
"as soon as you activate an audio source in virtualdj, it replaces the software virtual deck, that is why you lose a deck when you activate an audio source, it would require a version of virtualdj dj software with 1 additionnal software deck to keep 2 virtual decks in virtualdj when activating an external stereo source.
a possible solution, if you accept to mix only 1 channel of your voice processor instead of 2 channels, is to
- connect 1 output channel of your voice processor into dj console rmx microphone input,
- set the microphone volume button on the rmx very low,
- open dj console rmx control pannel, and disable the talkover attenuation in the main tab,
- and activate the mic on/off button on the dj console rmx each time you want to mix your voice processor in the music.
i never used a voice compressor, but i have already done this mix of an output of my groove box onto dj console rmx microphone input and it works well."
