hello
i recently got a dj control jogvision to use on the road with mixvibes cross. i mapped the entire controller and everything except the jog blue led ring is working. i can make them light up but there is not signal that i can use to make them rotate from mixvibes.
i understood from hercules documentation that by using
light-chaser 32 da firmware control b0 62 value 7f i would enable firmware control of the blue led in the jog wheel.
i can use value 00 or 7f and neither is working to activate the rotation.
little bit of help please.
Hello EDMFigDj,
Welcome on the forum, I have written Jogvision's MIDI commands guide.
Once you have activated the firmware control of the 32-LED blue light-chaser with command B0 62 value 7F,
then you can control the rotation speed with the command B0 63 + value (00 for Pause / 40 for full speed / 7F for dual speed).
To see a way to implement it, you can look at the Traktor mapping on Hercules support website, it uses this firmware control process.
Cheers,
MIB from the UX Team
