i finally solved some problems i had in the past, i still have to figure out why with an external mixer, specifically a ddm4000, sound by connecting the rmx 2 is not clean
i performed all tests, using the rmx 2 both as mixer to listen real vinyl or using only the remix 2 in timecode, audio is perfect and clean, however with the same configuration if i configure virtual dj with external mixer, audio i feel that it does not have the quality perfect,muffled, i feel a little low
i fear that the ddm4000 has problems ....
the connections between the mixer and rmx2 were all done well
the output rmx 2 i went in ddm 4000 entry line 1 and 2
Hello,
To diagnose what is not properly set:
- unconnect the audio output of the console Rmx2 from DDM 4000,
- connect if to the speakers,
- listen to it.
- If the sound is good, then the issue is probably on DDM4000 side, so you should check DDM4000 gain and filter settings.
- If the sound is bad, then the issue is probably on Rmx2 side, so you should check Rmx2 gain and filter settings.
