ciao,da quando ho eseguito l aggiornamento di djuced portandolo alla versione 1.0.52,quando lo collego a d esempio ad una periferica hdmi,non mi da più la possibilità di scegliere il canale per le cuffie,ovvero m da solo uscite 1 e 2.
altra cosa quando attivo gli effects si azionano tutti e 4 contemporaneamente(possiedo la consolle dj control air).
potete darmi una mano?grazie stefano
Hello Stefano,
1) Djuced lets you select 1 sound card at a time, so you should play the both preview on DJ Control Air headphones out and mix on DJ Control Air line out, so and if you select in Djuced your computer HDMI output as sound card to play the mix, then it is logical you cannot select another sound card than the HDMI as output for headphones.
A work around solution is to:
1- connect DJ Control Air audio speaker output to the line input of your computer (if any on your computer, you don't list your computer in the field "Describe your equipment" in your profile), via an audio cable jack 1/8" stereo male to jack 1/8" stereo male, like that.
2) Activate the line input (if there is a line input on your computer) in your operating system mixer panel.
3) Select DJ Control Air built in audio as sound card in Djuced (output 1-2 as Master, output 3-4 for headphones).
=> Then when you connect your HDMI output, you should have:
- the Mix on your HDMI output (as you have connected DJControl Air mix to the computer line in, and activate the line in, the mix goes to the HDMI output)
- the preview on the headphones output of DJ Control Air.
I don't understand your question on effects, please precise.
There is a Djuced reference manual here.
