when are we going to see the djuced eq isolator mapping?
the kill switch being part of the graphical interface is very inconinont when half of my laptop is under the controllers.
using an inpulse 500 feels really great with djuced, the programe feels very talloired to the controller. but for some of my more hard genres switching sets, i almost have to use serato pro to kill the highs, meds, and lows while just using the controller.
or can we map it our selfs by putting in a simple at "0" = kill buttion?
Hello Jimmy,
Welcome to the forum.
Thanks for your suggestion but in a test of mapping the kill at the minimum of the EQ there was a click noise between the kill 0 and the start of the EQ rotation, so it was not perfect, so the only solution on the EQ knob would be to change the EQ effect, which is not simply a mapping.
It remains possible to map the kill on a push button.
If I propose to map the kills on pads 6-7-8 (pad 6 kills High / pad 7 kills Mid / pad 8 kills Low),
- on which pad mode can you use the kill and lose the use of these 3 pads (Mode 1 = Hot Cue; 2 = Loop Roll; 3 = Slicer; 4 = Sampler; 5 = TonePlay; 6 = FX; 7 = SlicerLoop; 8 = BeatJump)
- which pad color do you suggest to say Kill is on (I suggest Red)?
Hello Jimmy,
Thanks for your answer and gain suggestion.
I can map the autogain & kills on Pads 5 to 8 on mode 7 but please make sure it is what you want: if you often use another pad mode, in which you use only 4 pads, it may be more convenient for you to
- remain on this pad mode you often use,
- assign the 4 favorite commands of this mode on pads 1 to 4,
- and set autogain and kills on this mode on pads 5 to 8,
as switching to a mode you never use to get kills and autogain is not a problem, but it may be even better to get them on mode you often use if in this mode you usually use only 4 pads.
