is it posible to use te rmx with reloop iq2 and cdj-400?
im think of buying the rmx bur i whanne know if i can extend it...
...sorry for my bad english...
greats,
deef
technically, it shouldnt be a problem. however, depending how you connect and configure everything, some additional components may be needed.
for example, the majority of pioneer cd player output signal at +8 dbu, which would be problematic if connected directly to the rmx ( which supports +4 dbu devices ). in this case, you would require an attenuator, as described in this acticle:
however, if the cdj-400, is connected to the reloop, that would not be a problem.
so i connect on the iq2 the rmx and the cdj-400 and then i kan use 3 decks? or is 1 on my rmx disabled?
again, it really depends how you want to use it all together, as possibilities are endless.
what sort of setup did your had in mind ?
i was thinking of using the hercules rmx with the reloop iq2 and a cdj-400...
maybe buy a second cdj-400 later...
ok, but could you be more precise on how you would connect everthing together?
for example: the rmx (using a dj software) for two sources, plus the cdj as an additionnal device, both going to different channels of the mixer?
Technically, it shouldn't be a problem. However, depending how you connect and configure everything, some additional components may be needed.
For example, the majority of Pioneer CD player output signal at +8 dBu, which would be problematic if connected directly to the Rmx ( which supports +4 dBu devices ). In this case, you would require an attenuator, as described in this acticle:
However, if the CDJ-400, is connected to the Reloop, that would not be a problem.
So i connect on the IQ2 the RMX and the CDJ-400 and then i kan use 3 decks? or is 1 on my RMX disabled?
Again, it really depends how you want to use it all together, as possibilities are endless.
What sort of setup did your had in mind ?
I was thinking of using the Hercules RMX with the Reloop IQ2 and a CDJ-400...
Maybe buy a second CDJ-400 later...
Ok, but could you be more precise on how you would connect everthing together?
For example: the Rmx (using a DJ software) for two sources, plus the CDJ as an additionnal device, both going to different channels of the mixer?
