Notifications
Clear all
0
09/09/2024 4:37 pm
Topic starter
Hi I have the t7 premium with Mac mini m1 16gb and serato pro when I pitch bend on platters slow down for example same bpm both tracks many times it goes fast I don't know why it's drifting I have serato anti drift on.
1 Answer
0
10/09/2024 8:39 am
Hello DJDubwar,
Welcome to the community area.
Maybe your DJControl Inpulse T7 platters need calibration.
Calibrating DJC Inpulse T7 platters takes less that 1 minute.
- Quit your DJ software
- Keep DJC Inpulse T7 connected to the computer USB port,
- Switch off Inpulse T7 with the Power push button on the rear panel
- Make sure Inpulse T7 lays on a flat table, with slipmat and vinyl disc on the platter,
- Push down the keys "Assist/Prep" and "Back" on deck 2 (right deck), just below the browser rotary encoder
- Keep "Assist/Prep" and "Back" keys down on deck 2, and switch on T7 with the Power rear button
- Release the "Assist/Prep" and "Back" keys on deck 2
- The platters calibration start automatically: both platters turn at variable speed.
- Wait until the platters stop turning. Wait the pads 1 to 4 on both decks are in green, the calibration is over.
A remark on enabling anti-drift software, this softwafre setting
- is the proper setting if you mix = if you do not scratch,
- should be avoid if you scratch.
