Clear all

Inpulse 200 MK2 + iPad Air connection Issue

1 Posts
2 Users
Topic starter

hi everyone, apologies if this has been covered before. I have a problem with connecting the Hercules Inpulse 200 MK2 to my iPad Air. I am using a USB 3 to USB-C powered hub. The hub has extra USB-C for power and a headphone jack. I connected the USB3 from the controller to the hub and also the power to USB C and plugged in the connector (USB C) to my iPad. I also used a RCA cable to connect the controller to the powered speakers. I can hear the music through the controller and to the speakers when I play a song on my iPad Air. I installed the Djuied app on the iPad. The controller lights up for a few seconds and then stays in standby mode but the app won't recognize the controller. I tried the Djay App as well. The Djay app recognizes the controller but still, the controller doesn't function/sync with the app. Can you let me know what can be a problem?

1 Answer


djay App has only a mapping for DJControl Inpulse 200 MK1, it has no mapping for DJControl Inpulse 200 MK2.
So it is normal 200 MK2 is not recognized.