Hello, I am very attached to my Hercules DJ Jogvision controller, but the crossfader is worn out. Is it technically possible to replace it with the premium crossfader developed for the T7? I haven't been able to find the technical specifications—such as dimensions or resistance in ohms—for the new dual-rail premium T7 crossfader... Thanks for your help.
Hello Nico69270,
Welcome to the forum.
DJControl Inpulse T7 premium fader module is a complete board (a printed circuit board with the crossfader + the 2 volume faders) so it is not a slide potentiometer component you would be able to place directly on your DJControl Jogvision printed circuit.
The crossfader component on T7 premium fader module is Taiwan Alpha RA45D1F-210-15C1-B10K,
https://www.taiwanalpha.com/downloads?target=products&id=168
its dual rail provides a better guidance than on your current crossfader, but it changes its mechanical dimensions so it cannot fit directly on Jogvision printed circuit board (dual rail faders are larger, so it needs more space on the circuit board).
So to replace your current crossfader in DJControl Jogvision, I suggest you replace your jogvision crossfader with Jogvision crossfader original component, Taiwan Alpha RA4544F-201-15C1-B10K, you may order a new one from Hercules support on
https://support.hercules.com/en/contact-en/
Hercules support team has referenced it with the reference 6000981
Okay, thank you for your reply.
