Notifications
Clear all

bricked dj console rmx

3 Posts
3 Users
0 Reactions
20 Views
0
Topic starter

i have tried all bootloader manual that support gave me but nothing helps. my dj console rmx doesn't work in any windows machine i tried. win7/win10/win11 with or without powered usb hub. i think my last try will be reflashing eeprom so i would like to ask you bin file for reprogramming eeprom. could you please?


3 Answers
0

Hi,

 

Welcome to the forum.

I have posted an answer to your attention in your private messaging area  (to read it, log on the website, go to your profile page and check the messages tab)


0

Hi, same here, my used RMX console worked 10mn with mixx, but I tried to install the official drivers and midimapping tool. I did not perform any firmware update, but the console is no more detected on the device manager (no refresh at all, no new device, no unworking device...). I tried with a new short cable, on several PCs, on usb 2 ports with a usb dock, etc. it only blinks all leds with mic on off always lit. I tried the reset with starting while pressing the mic on off but it doesnt change anything. I checked the soldering of the usb port, but it seems OK. So I want to try reprogramming the eeprom, and so need the .bin file of the firmware. My config is a t490 and a tiny 73 both under the last version of windows 10. 

Do you have any ideas of what could have been happened??

Thanks!


0

Hello,

 

Difficult to know what happened without attending the process, knowing the versions you installed, and seeing the messages your computer displayed at each step.

 

I am not sure what you refer as t490 or tiny 73, but in case they are Lenovo computers:

- Thinkpad T490 may be used in DJ apps, https://pcsupport.lenovo.com/ca/en/products/laptops-and-netbooks/thinkpad-t-series-laptops/thinkpad-t490s-type-20nx-20ny/?linkTrack=Homepage%3ABody_Search%20Products&searchType=3&keyWordSearch=T490s%20%28Type%2020NX,%2020NY%29%20Laptop%20%28ThinkPad%29

- I do not know Tiny 73.

 

If your Operating System is Windows 10 22H2, 21H2, 21H1 or 20H2

- You should use Hercules driver package 2020.HDJS.1 (do not use 2026.HDJS.2)

- Just uninstall Hercules MIDI Mapper, this tool is not for DJing, it is a developer app for Windows 7 32-bit to change the MIDI commands of the controller.

You can use DJUCED app https://www.djuced.com/downloaddjuced/ with your DJConsole Rmx.

 

If, after you install Hercules driver package 2020-HDJS-2, your DJ Console Rmx is not detected on a Thinkpad  T490 computer operating in Windows 10, just let me know and I send you the bin file to reprogram the eeprom, but first please precise,

- Your version of Windows 10

- Your Hercules driver package,

- Your complete computer model name,

as knowing the detailed technical information is always the 1st step to solve a technical issue.